Description
High Quality Anthracite Filter Media For Water Filtration
Anthracite which used water filtration
Our Anthracite filer media has been made of the ‘Taixi’ anthracite by washing, chosen as well as smash, continuous screening and so on procedures. It does have a nice lustrousness; resist compression, good mechanical strength, and steady chemical activity. We will offer you high quality anthracite filter media for the water filtration. Anthracite is an excellent filter media for water clarification in drinking or the industrial use, when it is used in combination with the filtering sands. It is among the most commonly used filtering media.
What is anthracite ?
Anthracite is a raw material for water purification as filter media. Anthracite has features of low ash, Sulphur , phosphorus and high calorific power, mass resistivity , percentage of lump coal, chemical activity, recycle rate of head coal, mechanical strength as well as enjoying trait of innocuity, in dissolvableness in acidic, neutral, alkaline water and so on.
Our Anthracite filter media is made of “Taixi” anthracite by washing, chosen, smash, repeatedly screening and so on procedures. Anthracite has nice lustrousness , mechanical strength, resist compression, hard wearing and steady chemical activity. Also, Anthracite has some separate-absorb activity, which can absorb and disposal color, stink, flavor and minute organism in water, and applied to filter life water, industrial water as well as municipal sewage. Anthracite a nice material for environment protection.
Chemical stability test of filter media (toxicity test) unit ：Mg/l
| Ingredient Item | Cn | As | Co | Pb | Zn | TFe | F | SiO2 |
| In acid solution | 0 | 0.003 | 0 | 0 | 0.08 | 0.94 | 0 | 0.4 |
| In alkaline solution | 0 | 0.004 | 0 | 0 | 0.04 | 0 | 0 | 1.1 |
| In neuter solution | 0 | 0.005 | 0 | 0 | 0.09 | 0 | 0 | 0.4 |
| Standard requirements | 0.05 | 0.04 | 1.0 | 0.1 | 1.0 | 0.3 | 1.0 | ∕ |
Physical performance of filter media
| Index No. | Rate of reduction
（%） |
Wear rate
（%） |
Mechanical strength
（%） |
Proportion
（g/cm3） |
Volume weight
（%） |
Poriness
（%） |
Memo |
| HI-1 | 3.07 | 0.30 | 96.93 | 1.71 | 0.695 | 40.6 | multidomained grain, polygon, asperities |
| HI-2 | 2.82 | 0.51 | 96.67 | 1.73 | 0.701 | 40.5 | Same as above |
| Standard requirements | ＜4 | ＜1 | ＞95 | 1.4-1.9 | ∕ | ∕ | Same as above |
What is Available sizes of anthracite?
| What is Bulk density of Anthracite? (KG/M3) | 780 | 780 |
| What is special gravity of Anthracite /CM3) | 1.5-1.8 | 1.5-1.8 |
| How much Hardness of Anthracite Mohs hardness | 4-5 | 4-5 |
| What about break rate of Anthracite? | ＜3% | ＜3% |
| How much wear rate of anthracite? | ＜0.3% | ＜0.3% |
| What acid solubility | ＜3% | ＜3% |
| fixed carbon | ＞80% | ＞90% |
| What is ash percentage of Anthracite? | ＜10% | ＜8.5% |
| volatile matter | ＜8% | ＜2% |
| Anthracite sulfur content | ＜0.5% | ＜0.5% |
| Anthracite moisture | ＜3% | ＜1% |